Find measure identifiers for GoGreen Home Energy Financing.
Filter results
Filter results
| Measure Name | Fuel Type | Self-install eligible | Measure Identifier |
|---|---|---|---|
|
Air Cleaner/Purifier Requirements: Energy Star® |
Electric | Yes | AP-ACLN |
|
Clothes Dryer (Gas) Requirements: Energy Star® |
Gas | Yes | AP-DRYG |
|
Refrigerator Requirements: Energy Star® |
Electric | Yes | AP-FRIG |
| Induction Range or Cooktop | Electric | Yes | AP-INDU |
|
Dishwasher Requirements: Energy Star® |
Electric or Gas | Yes | AP-DISH |
|
Freezer Requirements: Energy Star® |
Electric | Yes | AP-FREZ |
|
Clothes Dryer (Electric) Requirements: Energy Star® |
Electric | Yes | AP-DRYE |
|
Convection Electric Oven Measure Specification: Note: Financing available only for customers who receive electricity from PG&E, SCE, or SDG&E. |
Electric | Yes | AP-CNVE |
|
Range Hood Requirements: Energy Star® |
Electric | Yes | AP-RHDA |
|
Clothes Washer Requirements: Energy Star® |
Electric or Gas | Yes | AP-WASH |
- Measure requirements: Energy Star®
- Fuel type: Electric
- Eligible for self install: Yes
- Measure ID: AP-ACLN
- Measure requirements: Energy Star®
- Fuel type: Gas
- Eligible for self install: Yes
- Measure ID: AP-DRYG
- Measure requirements: Energy Star®
- Fuel type: Electric
- Eligible for self install: Yes
- Measure ID: AP-FRIG
- Fuel type: Electric
- Eligible for self install: Yes
- Measure ID: AP-INDU
- Measure requirements: Energy Star®
- Fuel type: Electric or Gas
- Eligible for self install: Yes
- Measure ID: AP-DISH
- Measure requirements: Energy Star®
- Fuel type: Electric
- Eligible for self install: Yes
- Measure ID: AP-FREZ
- Measure requirements: Energy Star®
- Fuel type: Electric
- Eligible for self install: Yes
- Measure ID: AP-DRYE
- Fuel type: Electric
- Eligible for self install: Yes
- Measure ID: AP-CNVE
- Measure requirements: Energy Star®
- Fuel type: Electric
- Eligible for self install: Yes
- Measure ID: AP-RHDA
- Measure requirements: Energy Star®
- Fuel type: Electric or Gas
- Eligible for self install: Yes
- Measure ID: AP-WASH
| Measure Name | Fuel Type | Self-install eligible | Measure Identifier |
|---|---|---|---|
|
Air Sealing – Whole Building Measure Specification: This measure may trigger combustion appliance safety testing. Learn more. |
Electric or Gas | No | BE-AIRS |
|
Radiant Barrier Requirements: Installed in the attic following manufacturer installation requirements |
Electric or Gas | No | BE-RADB |
|
Floor Insulation Requirements: Must meet the standards specific to the climate zone |
Electric or Gas | No | BE-INSF |
|
Cool Roof Requirements: Product must meet GoGreen Home Cool Roof Eligibility Requirements. Note: Financing available only for customers who receive electricity from PG&E, SCE, or SDG&E. |
Electric | No | BE-ROOF |
|
Attic Insulation Requirements: Must meet the standards specific to the climate zone |
Electric or Gas | No | BE-INSA |
|
Insulated Siding Requirements: Siding panels with rigid foam insulation backing |
Electric or Gas | No | BE-INSS |
|
Window Coverings: Exterior Requirements: Must be attached to the building structure. Eligible: solar screens, roller shade/shutters, louvered shutters, and awnings. |
Electric | No | BE-WCEX |
|
Windows/Glass Doors Requirements: Installed in conditioned space |
Electric or Gas | No | BE-WIND |
|
Window Film Requirements: Installed in conditioned space |
Electric or Gas | Yes | BE-WFLM |
|
Heat Reflective Coating Requirements: Product must have solar reflectance ≥ 0.5 as tested to ASTM C1549-16 |
Electric | No | BE-RADC |
|
Window Coverings: Interior Requirements: Must be installed in a conditioned space and cover the entire window aperture, specified window coverings. Eligible: cellular shades, window quilts, or roman shades. Not Eligible: Louvered blinds or shutters; drapes; curtains; sheer, roller, or pleated shades; solar screens. |
Electric or Gas | Yes | BE-WCIN |
|
Wall Insulation Requirements: Must meet the standards specific to the climate zone |
Electric or Gas | No | BE-INSW |
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: BE-AIRS
- Measure requirements: Installed in the attic following manufacturer installation requirements
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: BE-RADB
- Measure requirements: Must meet the standards specific to the climate zone
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: BE-INSF
- Measure requirements: Product must meet GoGreen Home Cool Roof Eligibility Requirements. Note: Financing available only for customers who receive electricity from PG&E, SCE, or SDG&E.
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: BE-ROOF
- Measure requirements: Must meet the standards specific to the climate zone
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: BE-INSA
- Measure requirements: Siding panels with rigid foam insulation backing
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: BE-INSS
- Measure requirements: Must be attached to the building structure. Eligible: solar screens, roller shade/shutters, louvered shutters, and awnings.
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: BE-WCEX
- Measure requirements: Installed in conditioned space
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: BE-WIND
- Measure requirements: Installed in conditioned space
- Fuel type: Electric or Gas
- Eligible for self install: Yes
- Measure ID: BE-WFLM
- Measure requirements: Product must have solar reflectance ≥ 0.5 as tested to ASTM C1549-16
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: BE-RADC
- Measure requirements: Must be installed in a conditioned space and cover the entire window aperture, specified window coverings. Eligible: cellular shades, window quilts, or roman shades. Not Eligible: Louvered blinds or shutters; drapes; curtains; sheer, roller, or pleated shades; solar screens.
- Fuel type: Electric or Gas
- Eligible for self install: Yes
- Measure ID: BE-WCIN
- Measure requirements: Must meet the standards specific to the climate zone
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: BE-INSW
| Measure Name | Fuel Type | Self-install eligible | Measure Identifier |
|---|---|---|---|
|
Battery Storage Requirements: Must be installed with an existing solar photovoltaic system. |
Electric | No | CE-BATT |
|
Solar Photovoltaic + Battery Storage Requirements: Must be installed together as a new pair of measures. |
Electric | No | CE-SOBT |
- Measure requirements: Must be installed with an existing solar photovoltaic system.
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: CE-BATT
- Measure requirements: Must be installed together as a new pair of measures.
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: CE-SOBT
| Measure Name | Fuel Type | Self-install eligible | Measure Identifier |
|---|---|---|---|
|
Thermal Energy Storage (TES) System Requirements: Must be used to shift energy usage to an off-peak time period on a recurring basis, referred to as permanent load shifting (PLS). |
Electric | No | DR-TESS |
- Measure requirements: Must be used to shift energy usage to an off-peak time period on a recurring basis, referred to as permanent load shifting (PLS).
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: DR-TESS
| Measure Name | Fuel Type | Self-install eligible | Measure Identifier |
|---|---|---|---|
|
Smart Electric Vehicle Chargers Requirements: Energy Star®; Must be capable of internet connectivity for grid interconnection |
Electric | No | TR-EVCH |
- Measure requirements: Energy Star®; Must be capable of internet connectivity for grid interconnection
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: TR-EVCH
| Measure Name | Fuel Type | Self-install eligible | Measure Identifier |
|---|---|---|---|
|
Evaporative Cooling Requirements: Ducted, ducted with dampers, or window coolers. Note: Financing available only for customers who receive electricity from PG&E, SCE, or SDG&E. |
Electric | No | HV-WCFA |
|
ECM Furnace Fan Motor Measure Specification: Note: Financing available only for customers who receive electricity from PG&E, SCE, or SDG&E. |
Electric | No | HV-FECM |
|
Smart Thermostat Requirements: Must be programmable through a user interface and capable of two-way communication of data to a location outside the home |
Electric or Gas | Yes | HV-SMRT |
| Air Filter Alarm or Sensor | Electric or Gas | No | HV-FALR |
|
Duct Sealing (New) Measure Specification: This measure may trigger combustion appliance safety testing. Learn more. |
Electric or Gas | No | HV-DUCR |
|
Mini Split Air Conditioning System Requirements: 18 SEER or greater. Note: Financing available only for customers who receive electricity from PG&E, SCE, or SDG&E. |
Electric | No | HV-MSPL |
| Central Heating and Air Conditioning System | Electric or Gas | No | HV-CHAC |
|
Ventilation Fan Requirements: Bathroom or in-line, ENERGY STAR® certified |
Electric | No | HV-VFEN |
|
Duct Sealing (Existing) Measure Specification: This measure may trigger combustion appliance safety testing. Learn more. |
Electric or Gas | No | HV-DUCX |
| Duct Sizing or Optimization | Electric or Gas | No | HV-DUCT |
|
Duct Insulation Requirements: Must meet the standards specific to the climate zone |
Electric or Gas | Yes | HV-DUCI |
|
Air Filter Upgrade – MERV Requirements: MERV 13 installed with an ECM fan motor and an air filter alarm |
Electric or Gas | No | HV-MERV |
|
Heat Pump Measure Specification: Split or packaged system |
Electric | No | HV-HPMP |
|
Mini Split Requirements: 18 SEER or greater |
Electric | No | HV-MSHP |
|
Fan or Motor Control Requirements: Controls for an HVAC fan or other motor. Note: Financing available only for customers who receive electricity from PG&E, SCE, or SDG&E. |
Electric | No | HV-CTRL |
| HVAC Tune-up and Optimization | Electric or Gas | No | HV-TUNE |
|
Central Air Conditioning Unit Measure Specification: Note: Financing available only for customers who receive electricity from PG&E, SCE, or SDG&E. |
Electric | No | HV-CACS |
| Diagnostic or Fault Detection Alert Systems | Electric or Gas | No | HV-ALRT |
| Whole House Fan | Electric | No | HV-HFAN |
| Hydronic Radiant Heating | Electric or Gas | No | HV-HYRA |
| Furnace – Residential Central Heating | Gas | No | HV-FURR |
| Wall Furnace – Residential In-Unit | Gas | No | HV-FANT |
- Measure requirements: Ducted, ducted with dampers, or window coolers. Note: Financing available only for customers who receive electricity from PG&E, SCE, or SDG&E.
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: HV-WCFA
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: HV-FECM
- Measure requirements: Must be programmable through a user interface and capable of two-way communication of data to a location outside the home
- Fuel type: Electric or Gas
- Eligible for self install: Yes
- Measure ID: HV-SMRT
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: HV-FALR
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: HV-DUCR
- Measure requirements: 18 SEER or greater. Note: Financing available only for customers who receive electricity from PG&E, SCE, or SDG&E.
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: HV-MSPL
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: HV-CHAC
- Measure requirements: Bathroom or in-line, ENERGY STAR® certified
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: HV-VFEN
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: HV-DUCX
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: HV-DUCT
- Measure requirements: Must meet the standards specific to the climate zone
- Fuel type: Electric or Gas
- Eligible for self install: Yes
- Measure ID: HV-DUCI
- Measure requirements: MERV 13 installed with an ECM fan motor and an air filter alarm
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: HV-MERV
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: HV-HPMP
- Measure requirements: 18 SEER or greater
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: HV-MSHP
- Measure requirements: Controls for an HVAC fan or other motor. Note: Financing available only for customers who receive electricity from PG&E, SCE, or SDG&E.
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: HV-CTRL
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: HV-TUNE
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: HV-CACS
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: HV-ALRT
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: HV-HFAN
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: HV-HYRA
- Fuel type: Gas
- Eligible for self install: No
- Measure ID: HV-FURR
- Fuel type: Gas
- Eligible for self install: No
- Measure ID: HV-FANT
| Measure Name | Fuel Type | Self-install eligible | Measure Identifier |
|---|---|---|---|
| LED Tape Lighting | Electric | Yes | LI-TAPE |
|
LED Lighting Requirements: LED fixtures and light bulbs. Must be Energy Star® certified. Recessed light fixtures in insulated ceilings must be rated ICAT (insulation contact air tight). |
Electric | Yes | LI-LEDL |
- Fuel type: Electric
- Eligible for self install: Yes
- Measure ID: LI-TAPE
- Measure requirements: LED fixtures and light bulbs. Must be Energy Star® certified. Recessed light fixtures in insulated ceilings must be rated ICAT (insulation contact air tight).
- Fuel type: Electric
- Eligible for self install: Yes
- Measure ID: LI-LEDL
| Measure Name | Fuel Type | Self-install eligible | Measure Identifier |
|---|---|---|---|
|
Other Measures Qualifying Through IOU/REN/CCA Programs Requirements: Measure not elsewhere on this list that qualifies for an IOU/REN/CCA energy efficiency or demand response program |
Electric or Gas | No | OT-REBA |
|
Smart Home Energy Management System Requirements: Energy Star® |
Electric or Gas | Yes | OT-SEMS |
|
Other Measures Qualifying Through IOU/REN/CCA Programs – Self-Install Requirements: Measure not elsewhere on this list that qualifies for an IOU/REN/CCA energy efficiency or demand response program and for which the IOU/REN/CCA program allows self-install |
Electric or Gas | Yes | OT-REBB |
- Measure requirements: Measure not elsewhere on this list that qualifies for an IOU/REN/CCA energy efficiency or demand response program
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: OT-REBA
- Measure requirements: Energy Star®
- Fuel type: Electric or Gas
- Eligible for self install: Yes
- Measure ID: OT-SEMS
- Measure requirements: Measure not elsewhere on this list that qualifies for an IOU/REN/CCA energy efficiency or demand response program and for which the IOU/REN/CCA program allows self-install
- Fuel type: Electric or Gas
- Eligible for self install: Yes
- Measure ID: OT-REBB
| Measure Name | Fuel Type | Self-install eligible | Measure Identifier |
|---|---|---|---|
|
Pool Pump Motor Requirements: Energy Star® |
Electric | Yes | PP-MOTR |
| Pool Cover (Gas Heater) | Gas | Yes | PP-COVG |
| Pool Cover (Electric Heater) | Electric | Yes | PP-COVE |
- Measure requirements: Energy Star®
- Fuel type: Electric
- Eligible for self install: Yes
- Measure ID: PP-MOTR
- Fuel type: Gas
- Eligible for self install: Yes
- Measure ID: PP-COVG
- Fuel type: Electric
- Eligible for self install: Yes
- Measure ID: PP-COVE
| Measure Name | Fuel Type | Self-install eligible | Measure Identifier |
|---|---|---|---|
|
Solar Water Heater Requirements: Energy Star® |
Electric | No | WH-SOWH |
| Faucet Aerator | Electric or Gas | Yes | WH-FAER |
|
Tank Insulation Requirements: For domestic hot water heater |
Electric or Gas | Yes | WH-TINS |
|
Heat Pump Water Heater Requirements: Energy Star® |
Electric | No | WH-HP55 |
|
Tankless On-Demand Water Heater (Gas) Requirements: Energy Star® |
Gas | No | WH-GTNK |
|
Tank Storage Water Heater (Gas) Requirements: Energy Star® |
Gas | No | WH-WHEG |
| Shower Thermostatic Valve | Electric or Gas | No | WH-SHTV |
|
Tankless On-Demand Water Heater (Electric) Measure Specification: Note: Financing available only for customers who receive electricity from PG&E, SCE, or SDG&E. |
Electric | No | WH-ETNK |
|
Water Pipe Insulation Requirements: For domestic hot water pipes |
Electric or Gas | Yes | WH-PIPE |
| Shower Head – Low Flow | Electric or Gas | Yes | WH-SHLF |
- Measure requirements: Energy Star®
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: WH-SOWH
- Fuel type: Electric or Gas
- Eligible for self install: Yes
- Measure ID: WH-FAER
- Measure requirements: For domestic hot water heater
- Fuel type: Electric or Gas
- Eligible for self install: Yes
- Measure ID: WH-TINS
- Measure requirements: Energy Star®
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: WH-HP55
- Measure requirements: Energy Star®
- Fuel type: Gas
- Eligible for self install: No
- Measure ID: WH-GTNK
- Measure requirements: Energy Star®
- Fuel type: Gas
- Eligible for self install: No
- Measure ID: WH-WHEG
- Fuel type: Electric or Gas
- Eligible for self install: No
- Measure ID: WH-SHTV
- Fuel type: Electric
- Eligible for self install: No
- Measure ID: WH-ETNK
- Measure requirements: For domestic hot water pipes
- Fuel type: Electric or Gas
- Eligible for self install: Yes
- Measure ID: WH-PIPE
- Fuel type: Electric or Gas
- Eligible for self install: Yes
- Measure ID: WH-SHLF
Benefit from contractor resources.
Find forms, documents, and other materials to help you complete your project with GoGreen Financing.
Explore tools
